REVISED: July 22, 2021

BREAKING NEWS (July 19, 2021)


The New York State Department of Labor Engineering Services has issued the following statement, which we have obtained, regarding their Pilot "Fast Track Variance (FTV)" program:

Good afternoon, As the results of an increasing number of questions concerning relief granted by some Fast Track Variances (FTVs), ESU has decided to temporarily stop the FTV program. ESU will go back and review each FTV to ensure that the relief granted, and conditions listed in the FTV are consistent with ICR 56 and appliable Federal requirements. ESU will also try to better define when and how each FTV can be utilized. There seems to be some confusion about how some FTV's are to be used. When ESU completes its review of an FTV, we will reissue that FTV for use moving forward. It is ESU's hope that this review will not take long. 


BREAKING NEWS

New York State Department of Labor has announced a continuation of their temporary extension for working with an expired Asbestos Handling Certificates (hard cards).  

If your Asbestos Handling Certificate (hard card) expired July 31, 2020 or later, you may continue to work using that existing card until July 31, 2021.

For people who have recently attended an INITIAL training course, within the past 120 days and has not received their Asbestos Handling Certificate (hard card), they may continue to use their "Student Copy" of their NYSDOH #2832 form (half sheet) with their photo identification.
For more information please go to:


UPCOMING IN-PERSON ASBESTOS  COURSES  

All in-person class attendees must observe strict Social Distancing, wearing the appropriate face coverings and frequent hand washing.  As a result of the Social Distancing requirement, we have created isolated spaces in the classroom and require the use of facial covering (nose and mouth) whenever the student(s) are not in their place at their table, so please contact us right away to reserve a spot for your students.

July 2021

            26                 EPA/NYS Asbestos O&M/Handler Refresher              ($90/160)         7:30-3 pm

            27                 EPA/NYS Asbestos Supervisor Refresher                   ($160.00)         7:30-3 pm

            28                 EPA/NYS Inspector/Management Plan Refresher      ($90/160)         7:30-11:30/3

            29                 NYS Air Sampling Tech/Project Monitor Refresher    ($90/160)         7:30-11:30/3

            30                 EPA/NYS Asbestos Project Designer Refresher         ($160.00)         7:30-3 pm

August 2021

            2-6                NYS Asbestos Air Sampling/Project Monitor Initial    ($745.00)         7:30-3 pm

            9-12              EPA/NYS Asbestos Worker/Handler Initial                ($600.00)         7:30-3 pm

            16-19            EPA Lead Paint Supervisor Initial                              ($700.00)         7:30-3 pm

            20                 EPA Lead Renov, Repair, Painting (RRP) Initial        ($200.00)         7:30-3 pm

            23-27            EPA/NYS Asbestos Supervisor Initial                         ($745.00)         7:30-3 pm

            30                 EPA/NYS Asbestos O&M/Handler Refresher             ($90/160)         7:30-3 pm

            31                 EPA/NYS Asbestos Supervisor Refresher                  ($160.00)         7:30-3 pm

September 2021

            1                   EPA/NYS Inspector/Management Plan Refresher     ($90/160)         7:30-11:30/3

            2                   NYS Air Sampling Tech/Project Monitor Refresher    ($90/160)         7:30-11:30/3

            3                   EPA/NYS Asbestos Project Designer Refresher        ($160.00)         7:30-3 pm

Happy Labor Day!!

Honoring & Recognizing the American Labor Movement!!           

            8-10              EPA/NYS Asbestos Inspector Initial                           ($455.00)         7:30-3 pm

            13-17            OSHA 40 Hour HAZWOPER Initial                            ($745.00)         7:30-3 pm

            15-17            OSHA 24 hour Emergency Response Initial              ($455.00)         7:30-3 pm

            20-24            EPA/NYS Asbestos Supervisor Initial                       ($745.00)        7:30-3 pm                              

            27                 EPA/NYS Asbestos O&M/Handler Refresher            ($90/160)         7:30-3 pm

            28                 EPA/NYS Asbestos Supervisor Refresher                  ($160.00)         7:30-3 pm

            29                 EPA/NYS Inspector/Management Plan Refresher      ($90/160)         7:30-11:30/3

            30                 NYS Air Sampling Tech/Project Monitor Refresher   ($90/160)         7:30-11:30/3

October 2021

            1                   EPA/NYS Asbestos Project Designer Refresher         ($160.00)         7:30-3 pm

(July 22. 2021)


PAYMENT OF TUITION

If you or your company are current customers of The Safety and Health Training Center, Inc., we can invoice your company for your students attending any of our on-line and in-person classes.  This will result in a normal tuition cost. 

As a current customer, you may also choose to pay by using the PayPal button on our Asbestos page.  If you choose this method, you will be paying a little higher tuition fee to help offset the PayPal fees associated with on-line payment services.

If you are not a current customer of The Safety and Health Training Center, Inc., you and/or your company must pay for the classes in one of two ways.  

The first would be to issue a company check and submitting it to us prior to the class or to have the student bring it on the first day of the class.  Using this method will result in the standard tuition cost.  

The second option is to pay the tuition using the PayPal options located below.  Using this option will result in an additional charge added to the tuition to offset the PayPal charges.

Thank you!

Inspector Refresher (half day) class
$90.00
REFRESHERS: Worker/Handler or Supervisor or Inspector & Management Planner or Project Monitor or Project Designer (Full day) courses
$165.00
INITIAL THREE DAY COURSES: Inspector or Project Designer
$465.00
INITIAL FOUR DAY COURSE: Worker/Handler
$615.00
INITIAL FIVE DAY COURSES: Supervisor or Project Monitor or Management Planner (with Inspector)
$765.00
Photos Courtesy of © www.earldotter.com

ON-LINE ASBESTOS REFRESHERS

The Safety and Health Training Center has been approved to provide on-line training for all Asbestos Refresher classes.

Classes will be performed using Zoom meeting platform and requires the following criteria:
  •  All participants must register prior to the class by calling (716) 838-6850 and providing their email address
  •  All participants must provide a legible ID (New York Driver's License or ID) prior to the class
  •  All participants must have a good internet connection
  •  Each student must sign into the platform individually
  •  Each student must have a computer with camera and video capability
  •  Each student must attend the class in its entirety.  They cannot arrive late and must return from breaks/lunch on time.  Failure to do so will result in the student not completing the course properly.  No makeup time will be allowed.
  •  There can be no distractions while taking the course.
  •  Each student cannot engage in any activity that is not related to the class.
  •  Paperwork/handouts and course materials will be provided to the student prior to the class.  Such documentation must be downloaded and/or printed in order to actively participate in the class.
  •  Each student must provide photo ID prior to the class by email.
CURRENTLY we are running all of our classes live and in-person.  Should we get enough requests for virtual classes, we will schedule them and list the dates and times below.  Thank you!!


ASBESTOS USE IN THE UNITED STATES IS NOT BANNED!!!

At the height of asbestos use in the United States (from 1950 – 1980), over 3,500 products contained asbestos (Asbestos Containing Materials - ACM).

The Environmental Protection Agency (EPA) banned asbestos use in 1973.  However the only products that were banned from manufacturing, use or importation were Sprayed-on Fireproofing
, Pre-fabricated Pipe Insulation and certain types of Felts.

The EPA ban of 1989, to eliminate approximately 1, 500 asbestos products was overturned and never implemented. A labeling requirement was instituted requiring all ACM’s to be labeled with asbestos content.

Currently in the U.S., it is estimated that over 1,800 ACM are manufactured, used or imported.

ACM is defined by the EPA as materials that contain more than 1% asbestos by Polarized Light Microscope (PLM). 

Polarized Light Microscopy is an analytical technique that identifies larger asbestos fibers or bundled (multiple) fibers in a bulk sample.  The magnification factor of a PLM is 400 times.  This magnification factor is not capable of identifying smaller asbestos fibers or non-bundled asbestos fibers.  The analytical technique that does identify all types of asbestos is known as Transmission Electron Microscopy or TEM.  The TEM analysis is capable of a magnification factor of 25,000X, which allows this method to identify asbestos specifically.

Additionally, the current regulated analysis for asbestos air samples is known as Phase Contrast Microscopy (PCM).  PCM is similar to PLM in that it has a magnification factor of 400 times and is not specific for asbestos fiber.  In fact, in many instances, PCM cannot identify the smaller or non-bundled asbestos fiber.  The only analytical technique that is specific for asbestos fiber is TEM.

At this time in the U.S., TEM analysis is only required for asbestos work done in schools (K-12th grade, public and private).

All other asbestos work done in the U.S. requires air samples to be analyzed by PCM.


We urge you to join us in our efforts to: have ALL asbestos products banned from manufacturing, use or importation into the United States; to support the Congressional Bill H.R. 6903 to ban ALL Asbestos Containing Products (ACP) and to stop this known killer from affecting any more American workers and families by signing our petition located at the following link:


ASBESTOS COURSE DESCRIPTIONS


All asbestos classes are certified and approved by the United States Environmental Protection Agency (EPA) and/or New York State Department of Health (NYSDOH).

 Initial Class                             Duration               Description

Allied Trades                            12 hours                Intended for carpenters, electricians,
                                                                                    plumbers or other trades who will
                                                                                    work ancillary to the asbestos project
                                                                                   
but will not remove asbestos

Operations & Maintenance   16 hours                Employees who will conduct  
                                                                                    repair/maintenance activities
                                                                                    where asbestos may be disturbed
                                                                                    (not removal).
                                                       
Air Sampling Technician      16 hours                 Employees who will conduct 
                                                                                    environmental air sampling.
                                             
Inspector                                   24 hours                 Employees who will conduct
                                                                                    inspections or surveys and collect 
                                                                                    bulk samples to identify the presence, 
                                                                                    location and quantity of asbestos 

Management Planner             16 hours                Employees who will develop a
(must complete an                                                   Management Plan to manage asbestos
Inspector course)                                                    in a facility (primarily schools – K-12th grade).

Project Designer                     24 hours                Employees who will design the scope,
                                                                                    timing, phasing and remediation 
                                                                                    methods for an asbestos project.

Worker                                     32 hours                Employees who will remove,
                                                                                   encapsulate, enclose or otherwise
                                                                                   disturb asbestos materials.

Supervisor                                40 hours                Employees who will supervise
                                                                                   workers during an asbestos
                                                                                   project and act as the OSHA
                                                                                   “competent person”.

Project Monitor                        40 hours               Employees who will oversee the 
                                                                                   timing, scope, phasing and
                                                                                   remediation methods to be used on an
                                                                                   asbestos project.

Refresher Classes

Each of the above courses requires an annual refresher course to be taken to maintain certification.

All Allied Trades, Operations & Maintenance, Air Sampling Technician and Inspector courses require a four (4) hour annual training program.  

All other disciplines require an eight (8) hour annual training course.

Awareness Classes

New York State Apprenticeship Program requires a four (4) hour Asbestos Awareness course for all apprentice training. 

OSHA requires a two (2) hour Awareness course for compliance.